A spin bike is a great tool for exercise in the form of indoor cycling. But, just like any other machines, it also requires proper maintenance to perform steadily. There is daily, weekly and monthly maintenance schedule, which will save a lot of your time and money. Besides, your spin bike will keep performing smoothly to meet customer’s satisfaction level. So, let us take a look at how you will maintain a spin bike.
What do you need to maintain a spin bike?
Here is what you need to maintain a spin bike:
- A tool including sockets, wrenches, and screwdrivers
- Equipment polish
- Chain degreaser
- Lubricants (silicon spray and chain wax)
Find out more from this video:
You can maintain a spin bike by the following time schedule:
The daily maintenance of a spin bike is not laborious. Just be careful about sweating since it is highly corrosive. It can cause enduring damage to some parts, which is very tough to replace on a regular basis. Do not worry because the solution is simple. First, you should rub down the seats, handlebars, and frames to remove sweat from those areas. Be more careful at some places like handle bar post, chain guard, and seat post. Besides, you should be focus on any kind of vibration (if formed) while running the pedals. Also, do not forget about the bottom bracket, pedals, or fine-tune the drive chain tension to stop vibrational problems. Torque the pedal with the use of a pedal wrench. Then you would just tighten the pedals to make sure they are secure.
Weekly maintenance is a bit tough. You have to check the connection of different hardware attached to the body of a spin bike and tighten them if necessary. You should make sure that the pull-pin frame fittings are comfortable for its user. If the frame is loose, it will lose out the threads gradually causing serious damage. Secondly, you must lubricate all parts for a smooth running of the machines. Along with it, you have to clean the pull-pin assemblies while dragging the pin on. Then you will lubricate them all with a few sprays on the shaft. The seat of a spin box should be leveled and centered properly. Torque the seat hardware to ensure it. The resistant pads should be brushed and treated properly. If foreign material, dirt or dust is accumulated on the pads, clean them quickly. Spray silicon lubricant on the pads to reduce the tension between pads and flywheel. Check the lowest bracket, toe straps, and top clips to see if they are perfectly set within the place. If you see any disconnected item, just tighten and connect them in no time.
The monthly maintenance mostly includes re-lubricating the frequently affecting parts and the major hardware check. Inspect the water bottles, flywheel nuts, brake caliper lock nuts, chain guard bolts, and brake caliper tension rod nuts. If they need any fixing, do it as soon as possible. Lubricate the drive chain after that. You can do it by a red straw on the chain wax can and looking for a small hole towards the back of the chain guard on the top side. Afterwards, you will lubricate the drive chain and rotate the crank slowly to lubricate more effectively. In the next step, you will have to clean as well as lubricate the brake tension rod for a sign of wear (e.g. missing threads). Inspect the seat post, seat slider, handle bar post, and clean them if necessary. Remove the foreign matter from the surface of materials at the point of insertion.
Many items need maintenance on a daily, weekly or monthly basis. If you use a spin box without fixing the faults, it will cause you serious problems afterward. Do not perform the maintenance operation without the help of a technician. Check for the recommended maintenance procedures by the manufacturer and if you find any, stick to those procedures properly.
How Can a Spin Bike Benefit your Customers?
Spinning increases your strength. A very effective exercise needs every leg muscle if you do it systematically. It may be painful and tiring for the first few days but gradually you will feel a change within your body. If you do this at the gym, the instructor will teach you how to utilize different leg muscles for spinning the pedals.
The spinning bikes offer a completely natural way of spinning your legs in a circular motion. There is no fear of falling on the ground or get hurt like running. Users of this bike may spin the paddles at different speeds. Some of them spin with high resistance part of the time whereas some spin with low resistance at other time. So, it creates a good flow of a complete workout.
- It is a great cardio workout; the output of this exercise is very intense and helpful. Besides, a speed of 90rpm or more is great for increasing leg turnover for running. This exercise is beneficial to them who want to increase their turnover and improve the race times. This is also an awesome indoor workout, which let you do cycling even in bad weather.
- An instructor may not motivate a full group of yours. Different instructors train in different manners and it is quite normal. So, join first few classes and find out new people around. Meet them and spend quality time by taking this exercise. Get training from your most favorite instructor because it will keep you motivated.
- If you regularly do spinning, it will burn many calories within a short time. In case, you do not like spin bikes, do not do that. You should not do anything without asking yourself! Listen to your body and simply back off. Keep spinning for several weeks and you will feel as if your level has upgraded. Gradually, you will become the master of spin bikes!
The spin bike is a very impressive exercise tool that has excellent activities. Runners and fitness lovers can check this out and develop the habit of indoor cycling with a spin bike. Check out the best exercise bike and buying guide here.